Select Battery Charge State - Launch BST-460 User Manual

LAUNCH
BST-460 Battery System Tester User Manual
Follow the instructions to turn lights on to eliminate battery surface
charge, the tester will then display the following messages in a
sequence:
Now the tester detects the surface charge has been eliminated, turn
lights off as prompted, then press OK key. The tester will recover
automatic test.
2) OUT-OF-VEHICLE means battery is not connected with any of the
vehicle load, namely, battery connection is cut off.

3.3.2 Select Battery Charge State

After selecting the battery location, the tester will prompt to select the
battery charge status, i.e. Before Charging or After Charging.
Press UP/DOWN key to select, then press OK key to confirm. In this
8