SHERCO 250 SE/R Workshop Manual page 53

Details :
• Stepper position : Not used.
• Throttle valve position : Not used.
• Stop button status : status of the emergency stop button. 0 : deactivated, 1 : activated.
• Engine status : ES (engine ready to start), ST (engine starts), IS (idle speed), PL
(acceleration), PU (deceleration).
2 - Other less used values appear in the windows :
• Throttle valve position : Not used.
• Input pressure (mb) : Not used.
• Engine synchronisation status : recognition of the motorcycle.
0 : engine unphased.
1 : running engine phased.
• Adaptive for all idle speed controller functions ( %) : function not enabled.
C - Reading fault codes
• When you click on "reading fault codes" the system starts the verifications.
• If no fault appears, exit the menu with the icon
• If faults appear :
53