Table of Contents
Advertisement
WATTrouter Mx - user manual
MAINTENANCE AND REPAIRS
The WATTrouter Mx devices have been designed as maintenance-free units, provided that they were
configured and fitted according to instructions specified in this manual. We recommend inspecting the
operation of the entire system at regular intervals (at least once in a month, for example, when inspecting the
status of the PV-plant). Focus mainly on the load switching process and heat dissipation.
Should you discover a defect which cannot be repaired according to instructions specified in the
Troubleshooting chapter, contact your distributor (applies both to warranty and post warranty repairs).
Defect on current sensing module is very improbable. In case of a defective regulator, you can send only the
regulator for repair or replacement. The current sensing module may still remain fitted without the regulator.
Even if electric currents flow through measuring coils, the module will not be damaged.
Never attempt to repair your device by yourself! If you do so, you are putting yourself at risk of electric
shock. Further, your entire warranty will be void!
How to fit and setup the device
Page 78 from 82
Advertisement
Table of Contents
Need help?
Do you have a question about the WATTrouter Mx series and is the answer not in the manual?