Agilent Technologies 34405A User's And Service Manual page 5

Additional Notices
This product complies with the WEEE Direc-
tive (2002/96/EC) marking requirement.
The affixed product label (see below) indi-
cates that you must not discard this electri-
cal/electronic product in domestic
household waste.
Product Category: With reference to the
equipment types in the WEEE directive
Annex 1, this product is classified as a
"Monitoring and Control instrumentation"
product.
Do not dispose in domestic household
waste.
To return unwanted products, contact your
local Agilent office, or see
www.agilent.com/environment/product
for more information.
34405A User's and Service Guide
Downloaded from www.Manualslib.com
The Agilent 34405A is provided with an Agi-
lent 34138A Test Lead Set, described below.
Test Lead Ratings
Test Leads - 1000V, 15A
Fine Tip Probe Attachments - 300V, 3A
Mini Grabber Attachment - 300V, 3A
SMT Grabber Attachments - 300V, 3A
Operation
The Fine Tip, Mini Grabber, and SMT Grab-
ber attachments plug onto the probe end of
the Test Leads.
manuals search engine
Maintenance
If any portion of the Test Lead Set is worn or
damaged, do not use. Replace with a new
Agilent 34138A Test Lead Set.
WA R N I N G
If the Test Lead Set is used in a
manner not specified by Agilent
Technologies, the protection pro-
vided by the Test Lead Set may be
impaired. Also, do not use a dam-
aged or worn Test Lead Set.
Instrument damage or personal
injury may result.
V