Table of Contents
Advertisement
8.6 Changing the IP address and using DHCP
To change the module's IP address, in the web interface, select the "Settings" → "Network" menu option.
Adjust the IP address, subnet masks and any gateway or DNS server addresses for your local network and
confirm the changes by clicking on the "Apply" button.
After changing the network configuration you will have to restart the module.
To use addresses dynamically assigned via DHCP, check the corresponding box. In this case the module will
automatically take its network configuration from a DHCP server..
Please note that if you use DHCP to dynamically allocate IP addresses, there is no integrated way
of finding out what IP address has been allocated. This is why the DHCP server should be config-
ured so that the module is issued with an IP address which is known in advance.
Please contact your network administrator for more information.
- 29 -
Advertisement
Table of Contents
