Keithley PIO-12 User Manual page 21

2-4
2. On the DriverLINX CD Navigator screen, click Install
DriverLINX. An Install These DriverLINX Components screen
appears.
3. Click Install Drivers, and then follow the series of on-screen
instructions. When done, the Install These DriverLINX Components
screen reappears.
4. If you do not plan to develop custom application software for your
PIO-12 board, then skip to Step 5. If you do plan to develop custom
application software, you must install DriverLINX interfaces before
writing the software. Install them now by clicking Install Interfaces
and following the series of on-screen instructions. When done, the
Install These DriverLINX Components screen reappears.
5. Click Install Documentation and follow the series of on-screen
instructions. This step installs the manuals. When done, the Install
These DriverLINX Components screen reappears.
6. If Acrobat Reader is not already installed on your system, install it
now. You need Acrobat Reader to read the manuals, a section of
which you must access in step 9. Click on Install Acrobat and
follow the series of on-screen instructions. When done, the Install
These DriverLINX Components screen reappears.
7. Click Exit. Then, on the screen that appears saying "Thank you for
using DriverLINX," click Done. The System Settings Changed
dialog box appears.
8. On the System Settings Changed dialog box, click No. (The system
will be rebooted and configured later under "Configuring Your
Installation.") The screen returns to the Windows desktop.
9. Print out one section of a DriverLINX manual that you will briefly
review later during system configuration. Proceed as follows:
a. In the Start menu under Programs
On-line Manuals. A menu document appears.
b. In the menu document, scroll until you find the major category
Configuration.
→
DriverLINX, click
Installation