Installation Options On The Driverlinx Cd-Rom; Installation Procedure - Keithley PIO-12 User Manual

Hide thumbs Also See for PIO-12:

Table of Contents

Installation Options on the DriverLINX CD-ROM

The component installation options provided by the DriverLINX setup

program are as follows:

Install Drivers — This required component installs only the ﬁles you

need for conﬁguring your hardware and running third-party

data-acquisition applications that require DriverLINX.

Install Interfaces — This optional component installs the ﬁles and

example programs that you will need to develop custom applications

for DriverLINX using C/C++, Visual Basic, and Delphi.

Install Documentation — This optional component installs

electronic documentation for DriverLINX that you can read, search,

and print using the Adobe Acrobat Reader.

Install Acrobat — This optional component installs the Adobe

Acrobat Reader for the DriverLINX electronic documentation.

Install the DriverLINX software and board as follows:

1. Place the DriverLINX PIO Series CD-ROM in your drive and wait a

few seconds. On most systems, setup starts automatically. If not, run

the setup.exe ﬁle, found in the root directory of the CD-ROM.

A DriverLINX Browser Introduction screen appears. Thereafter, the

DriverLINX CD Navigator screen appears automatically after

waiting a few seconds or after clicking Next.

On the DriverLINX CD Navigator and other DriverLINX Browser

Note:

screens, place the cursor over a menu item to see an explanation. A star

next to a menu item means that it was selected previously.

Before continuing with this installation, Keithley suggests clicking Read

Me First on the DriverLINX CD Navigator and reviewing the brief

information that appears.

2-3

Table of Contents