Table of Contents
Advertisement
Overview
This section contains instructions for installing and configuring the
PIO-12 board and software.
This section describes the following:
Inventorying installation resources
Installing the DriverLINX software needed to operate your PIO-12
board
Configuring the installation in software
Unpacking and inspecting the board, setting the base address of the
board, and then installing the board in your computer
Checking the installation
If you encounter any problems with the board after installation, refer to
Section 5 for troubleshooting information.
Install the DriverLINX software before installing the PIO-12
Note:
board. Otherwise, the device drivers will be more difficult to install.
Installation
2
2-1
Advertisement
Table of Contents
Troubleshooting
