Replacing The Battery Pack - Wasp WWS650 Quick Reference Manual

Replacing the Battery Pack

NOTE
1. Using a coin or screwdriver, unscrew the bottom of the
battery pack until it is disengaged.
The battery pack will rise slightly in the rear, pushed by
the contact springs.
2. Extract the battery pack by slightly rotating the pack
and pulling away from the reader.
To mount the new battery pack reverse the process:
1. Insert the top of the new pack inside the reader's han-
dle.
2. Rotate the battery pack downward while pressing the
bottom side of the battery pack (to seat securely into
the contacts springs) so that the edges of the pack and
the handle board are aligned, while replacing the screw
in the bottom of the handle.
Quick Reference Guide
Before proceeding, read "Battery Safety" in the
Regulatory and Safety insert. Wasp recommends
annual replacement of rechargeable battery packs
to ensure maximum performance.
Connecting the Base Station
9