Wasp WWS650 Quick Reference Manual page 13

4. Connect to an AC Adapter, and plug the AC power cord
into the (wall) outlet.
Figure 3. Connecting the Base Station
Host Connection —
cable type is compatible with your host equipment.
NOTE
Most connections plug directly into the host device as shown
in Figure 4. Keyboard Wedge interface cables have a 'Y' con-
Quick Reference Guide
Verify before connection that the reader's
The Wasp WWS650 reader can be set up to
require a PIN code when connecting to the host.
If you are adding new equipment to a system
that uses a custom security PIN, please see the
PRG for information before proceeding.
Connecting the Base Station
Cable Stopper
reinserted
5