Setting The Clock - Sony MHC-GTR888 Operating Instructions Manual

Table of Contents

Advertisement

3
Insert the pins of the Spacer B
(supplied) to the catcher holes on
the front right speaker.
Spacer B
Front right
speaker
4
Stack the satellite right speaker on
the front right speaker. Make sure
the catcher holes of the satellite
right speaker is inserted to the pins
of the Spacer B.
Satellite
right
speaker
Spacer B
Front right
speaker
5
Check that the woofer of the
satellite right speaker is near to the
unit.
Turn the SONY emblem on the
satellite right speaker to horizontal
position.
Woofer
Satellite right
speaker
Front right
speaker
Subwoofer
6
Repeat steps 1 to 5 to install
another subwoofer, front left
speaker and satellite left speaker.
Pin

Setting the clock

Catcher
hole
You cannot set the clock in Power Saving
Mode.
Use the buttons on the remote control to
perform this operation.
1
Press "/1 to turn on the system.
2
Press CLOCK/TIMER SET.
If "PLAY SET" appears in the display
panel, press ./> repeatedly to
select "CLOCK SET", then press
ENTER.
Catcher
3
hole
Press ./> repeatedly to set
the hour, then press ENTER.
Pin
4
Press ./> repeatedly to set
the minutes, then press ENTER.
SONY
emblem
GB
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mhc-gtr777Mhc-gtr333Mhc-gtr555

Table of Contents