Table of Contents
Advertisement
Creating your own program
(Program Play)
You can make a program of up to 25 steps
in the order you want them to be played
back.
Use the buttons on the remote control to
perform this operation.
1
For CD function:
Press CD.
For USB function:
Press USB.
2
When playback is stopped,
press PLAY MODE repeatedly
until “PGM” lights up in the
display panel.
3
For CD function:
Press DISC SKIP repeatedly to select
the disc you want.
For USB function:
Press USB SELECT repeatedly to
select the USB device you want.
4
(Audio files only)
Press
+/– repeatedly to select a
folder.
If you want to program all files in the
folder, press ENTER.
5
Press ./> repeatedly to
select the track or file you want,
then press ENTER.
Disc tray number
Selected track
Total playing time of
or file number
program (including
selected track or file)
“--.--” appears when the total playing
time exceeds 100 minutes for an
AUDIO CD or when you program an
audio file.
6
Repeat steps 3 to 5 to program
additional tracks or files.
7
Press N to start Program Play.
To cancel Program Play
When playback is stopped, press PLAY
MODE on the remote control repeatedly
until “PGM” disappear from the display
panel.
To delete the last step from the
program list
Press CLEAR on the remote control when
playback is stopped.
Notes
• (CD function only) The program list remains
available until you open the disc tray.
• (USB function only) The program list is
cleared when you:
– perform the erase operation.
– remove the USB device.
– switch the USB memory select.
Playing repeatedly (Repeat
Play)
Press REPEAT on the remote control
repeatedly.
• REP: repeat all tracks or files
• REP 1: repeat a track or file
Note
You cannot select “REP” and “ALL DISC
SHUF” at the same time.
GB
Page 13
Hide quick links:
Advertisement
Table of Contents
