Pen/Touch Screen - Itronix GoBook Pro Getting Started

GoBook Pro Help
I can't remove the PC card
Press the ejector button located inside the PC card door on the side of the computer. The button
l
will pop out. Press the ejector button again to eject the PC card. Slide the card out.
If the ejector button malfunctions when you press it, release the button and then press it again.
l
Diskette Read Error
Any card in the PC Card socket except for a properly formatted memory card will cause this error
l
since it is trying to read the PC Card.
The system does not recognize the PC Card CD-ROM when it is inserted into the PC Card socket
There is a delay of 10 to 15 seconds before the CD-ROM drive is recognized.
l
Drivers may not be installed. Contact your organization's help desk for assistance.
l
The computer locks up when I remove the PC card
Before you remove the card, select the PC card icon in the system "tray" area of the screen (near
l
the clock in the lower right corner), and choose "Stop [card name] card."
79_0100_001
© 2001 Itronix Corporation. All rights reserved.
GoBook Pro Help

Pen/Touch Screen

When I try to use the stylus on my touch screen, nothing happens
If you cannot select objects accurately with the stylus, you may need to recalibrate the touch
l
screen.
To calibrate the touch screen
1. From the Start Menu, select Programs, UPDD, and then choose Calibrate.
file://C:\WINDOWS\TEMP\~hh6357.htm
B. Troubleshooting Topics
Page 71 of 74
5/23/01