Connecting The Ac Adapter; Turning The Computer On And Off - Itronix GoBook Pro Getting Started

GoBook Pro Help
1. Align the battery connectors and place the battery in the computer.
2. Slide the battery latch to the locked position.
3. Make certain that the battery latch engages properly.
NOTE When the battery is installed and the computer is connected to AC power, see Connecting the
AC Adapter below, it starts charging automatically. At moderate temperatures, approximately 70°
Fahrenheit (21°C), the battery will be fully charged in four to six hours. In warmer or cooler
temperatures, the battery can take much longer to fully charge. Refer to
additional information.

Connecting the AC Adapter

To connect the AC adapter
1. Connect the AC adapter power cord to the AC adapter.
2. Connect the AC adapter to the power jack at the right side of your computer.
3. Connect the AC adapter power cord to an AC outlet.
4. Lift the display to open the LCD.
5. Open the LCD panel to a comfortable viewing angle.
6. Press FN On (FN+spacebar) to turn ON the power.

Turning the Computer On and Off

You can operate the computer while the battery is charging, while on
power only.
To turn on the computer
Press the FN On (spacebar) once, and then give the system time to respond.
l
To turn off the computer
1. Press FN Off (Q key) to enter Off Mode
2. From the Start menu, click Shut Down. Then, from the Shut Down Windows screen select Shut
Down and click OK.
3. Press FN+F10 to Suspend to Disk
4. Close the lid (monitor) of the computer. To enable this option go to Start, Settings, Control
Panel, and Power Management. Choose the Advanced tab and select Standby or Shutdown from
file://C:\WINDOWS\TEMP\~hh6357.htm
Power Management
external power , or on battery
Page 6 of 74
for
5/23/01