Navigation And Help - Itronix GoBook Pro Getting Started

GoBook Pro Help
on the computer display that says "Press F2 to run Setup." When you see this prompt, press the F2 key
and the system will start the Setup Utility and display the main menu of the utility.

Navigation and Help

The Menu Bar
The Setup Utility has these six menu options in the Menu Bar at the top of the window:
Main Use for basic system configuration
Advanced Use to set the advanced features
Security Use to set user and supervisor passwords and the backup and virus-check
reminders
Power Use to configure power management features
Boot Use to select the sequence boot devices that are searched to load an
system
Exit Use to exit the current Setup session
The Legend Bar
You can use the keys in the legend bar at the bottom of the Setup Window to make selections or exit
the current menu.
Key
F1 or ALT+H
ESC
Left/Right Arrow Keys
Up/Down Arrow Keys
TAB or SHIFT+TAB
HOME or END
PgUp or PgDn
F5 or -
F6 or + or Space
F9
F10
Enter
ALT+R
The Field and General Help Windows
The Field Help Window is on the right side of each menu. It displays the help text for the currently
selected field. This text updates as you move the cursor from field to field.
The General Help Window describes the legend keys and their alternates. You can display it by
pressing F1 or ALT+H on any menu.
file://C:\WINDOWS\TEMP\~hh6357.htm
Function
General Help Window
Exit this menu
Select a different menu
Move the cursor up or down between fields
Cycle the cursor up and down
Move the cursor to the top or bottom of the window
Move the cursor to the next or previous page
Select the Previous Value for the field
Select the Next Value for the field
Load the Default Configuration values for this menu
Save and exit
Execute command or Select Submenu
Refresh the screen
Page 30 of 74
operating
5/23/01