Installing Your Wireless Modem Software - Itronix GoBook Pro Getting Started

GoBook Pro Help
Cisco Wireless LAN
The wireless modem is powered ON after initial boot, reboot, or resume as indicated by the wireless
modem LED activity indicator being solid green. It can be turned off by right clicking the PC Card icon
in the system task tray, then selecting "Stop Cisco Systems 340 Series Wireless LAN Adapter". It can
be repowered by doing a suspend/resume, or by rebooting the computer.
79_0100_001
© 2001 Itronix Corporation. All rights reserved.
GoBook Pro Help

Installing Your Wireless Modem Software

Installing the Software for Your Wireless Modem
Following are the installation procedures for installing the
Air Card 300 (CDPD)
Software comes pre-installed
l
Air Card 350 (CDPD)
Software comes pre-installed
l
RIM 902M (Mobitex) for Cingular
The RIM 902M radio is automatically installed through the Plug and Play feature of the Windows
operating system. Once installed the radio can be accessed as COM4.
1. To verify the radio is installed and functioning correctly, a hyperterminal session can be used to
access RIM's built in diagnostic program.
2. To access this diagnostic program, create a hyterterminal session direct to COM4 with 8 data
bits, no parity, 1 stop bit, and hardware handshaking.
3. Once a connection has been established, type "menu" (lower case, without the quotes) and press
file://C:\WINDOWS\TEMP\~hh6357.htm
4. Wireless Modem Topics
software for your wireless modem.
Page 23 of 74
5/23/01