Table of Contents
Advertisement
4. Place the wall bracket over the inlet pipes and
mark the position of the 2 wall bracket fixing
holes.
Note! Consider the position of concealed
pipework.
5. Mark the pipe distance 25 ± 5 mm from the
finished wall.
6. Drill the 2 holes for the wall brackets with a 6
mm drill and insert the wall plugs (some wall
structures may require alternative fixings, not
supplied).
Caution! Take care not to drill though any
concealed pipework.
7. Secure the wall brackets to the wall with the
fixing screws supplied.
Caution! Make sure that you do not push
the pipe into the wall cavity.
8. Install the olives onto the inlet pipes and tighten
the nuts.
Ø6 mm
7
25 mm
25 mm
Fixing Screw
Olive
Nut
Hide quick links:
Advertisement
Table of Contents
