Table of Contents
Advertisement
INTRODUCTION
Thank you for purchasing a quality Mira product. To
enjoy the full potential of your new product, please
take time to read this guide thoroughly, having
done so, keep it handy for future reference.
The Mira Coda Pro ERD thermostatic bar valve
is a thermostatic shower control designed for wall
mount installations.
The thermostatic bar valve has two knobs, one
knob controls the flow and the other knob controls
the temperature.
The Mira Coda Pro ERD is supplied with a fixed
showerhead, rigid riser and diverter assembly,
in addition to a single mode showerhead and
shower fittings kit.
The thermostatic bar valve incorporates a wax
capsule temperature sensing unit, which provides
an almost immediate response to changes in
pressures or temperature of the incoming water
supplies, to maintain the selected temperature. An
adjustable maximum temperature stop is provided
which limits the temperature to a safe level.
Inlet filters are fitted to protect the thermostatic
cartridge.
Guarantee
For domestic installations, Mira Showers
guarantee the Mira Coda Pro ERD against any
defect in materials or workmanship for a period
of five years from the date of purchase (shower
fittings for one year).
For non-domestic installations, Mira Showers
guarantee the Mira Coda Pro ERD against any
defect in materials or workmanship for a period
of one year from the date of purchase.
For terms and conditions refer to the back cover
of this guide.
Recommended Usage
Application
Domestic
Light Commercial
Heavy Commercial
Healthcare
Patents and Design Registration
Patents: GB: 2 407 138
Design Registration: GB: 001225254-0003
Valve with
Fittings
ü
ü
û
û
SAFETY WARNINGS
The function of a thermostatic mixing valve is to
deliver water consistently at a safe temperature. In
keeping with every other mechanism, it cannot be
considered as functionally infallible and as such,
cannot totally replace a supervisor's vigilance
where that is necessary. Provided it is installed,
commissioned, operated and maintained within
manufacturers recommendations, the risk
of failure, if not eliminated, is reduced to the
minimum achievable.
Mira thermostatic mixers are precision engineered
and should give continued safe and controlled
performance, provided:
1. They are installed, commissioned, operated
and maintained in accordance with the
manufacturer's recommendations.
2. Periodic attention is given, when necessary,
to maintain the product in good functional
order.
Caution!
1. Read all of these instructions.
2. Retain this guide for later use.
3. Pass on this guide in the event of change of
ownership of the installation site.
4. Follow all warnings, cautions and instructions
contained in this guide.
5. Anyone who may have difficulty understanding
or operating the controls of any shower should
be attended whilst showering. Particular
consideration should be given to the young,
the elderly, the infirm or anyone inexperienced
in the correct operation of the controls.
6. Rapid/Excessive movement of the flow and/
or temperature control levers may result in
momentary unstable blend temperatures.
7. Care is required when adjusting flow or
temperature, make sure that the temperature
has stabilised.
8. When this product has reached the end of its
serviceable life, it should be disposed of in a
safe manner, in accordance with current local
authority recycling, or waste disposal policy.
If you experience any difficulty with the
installation or operation of your new
thermostatic mixer, please refer to 'Fault
Diagnosis', before contacting Kohler Mira Ltd.
Our contact details can be found on the back
cover of this guide.
2
Hide quick links:
Advertisement
Table of Contents
