Air Receiver Installation - Champion R Series Operation & Service Manual

Air Receiver Installation

Vibration isolator pads can be purchased from your local authorized distributor. Installation hardware
items (studs, screws, nuts, shims) are not provided. It is the compressor owner's responsibility to
provide a suitable foundation and isolator installation.
Do not tighten the anchor screws/nuts down completely – this will result in undesirable stress on
the tank foot. This can cause abnormal vibration and possible cracking of the air receiver, resulting
in injury or equipment damage.
TEN011442-00
(Ref. Drawing)
R-Series Electric
Operation & Service
CUT-AWAY VIEW OF
ANCHORED
INSTALLATION
13 CQF3473 v.01
April 17, 2018