Table of Contents
Advertisement
15. REPLACING THE FLUORESCENT LAMP, AND LAMPS
The Error Lamp is used when the Printer (optional) is incorporated. If the Printer (optional) is
not incorporated, disregard the following explanation of replacing the ERROR LAMP.
Regarding the U.S. Specifications:
The parts employed for the U.S. Specifications machines are procured in the U.S.A. Therefore,
the parts in the U.S. Specifications are different from those of described in this section or listed
in the PARTS LIST. When replacing the Fluorescent Lamp, be sure to contact where you
purchased the product from.
When performing work, be sure to turn power off. Working with power on
can cause electric shock and short circuit hazards.
The Fluorescent Lamp, when it gets hot, can cause burn. Be very careful
when replacing the Fluorescent Lamp.
Be sure to use lamps of the designated rating. Using lamps of undesignated
rating can cause a fire or malfunctioning.
To perform work safely and securely, be sure to prepare a step which is in a
secure and stable condition. Performing work without using the step can
cause violent falling down accidents.
When handling glass-made or plastic parts, use care. Failure to observe this
may damage parts and cause injury due to fragments resulting from damage.
This product employs the total of 4 fluorescent lamps and the total of 2 slim lamps (no-electrode
lamps).
57
www.seuservice.com
Advertisement
Table of Contents
