Replacing The Switch - Sega type twin F355 Owner's Manual

10 - 2 REPLACING THE SWITCH

In case 6-speed Shift operability is poor, malfunction of or damage to the Microswitch of
Mechanism can be considered. The 6-speed Shift has 4 Microswitches. Be sure to check which
Switch malfunctions prior to performing work.
1
Remove 6-speed Shift as per
procedure 10-1.
2
Disconnect the wiring connected to
the Microswitch.
3 Take out 2 screws to replace the
Microswitch.
4 Adjust Microswitch's actuator to
an angular position so as not to
touch the Switch when operating
the Shift Lever.
5
Fasten 2 screws to secure the
Microswitch.
6
Check to ensure that the Switch
goes ON and OFF in consistency
with the operation.
www.seuservice.com
SCREW (2)
M2.3 X 10,w/flat & spring washers
MICROSWITCH
509-5636
SCREW (2)
M2.3 X 10,w/flat & spring washers
MICROSWITCH
509-5636
PHOTO 10. 2 b
38
PHOTO 10. 2 a