Greasing - Sega type twin F355 Owner's Manual

5
After replacing the Volume, engage the gears at the angular position shown and fix the VR
Bracket.
6
Turn on power.
7
Set the Center Value of the Volume in the TEST mode.
8
In the TEST mode, check to see if the Volume Value varies smoothly in accordance with the
steering wheel operation.

9 - 2 GREASING

Be sure to use the designated grease. Using undesignated grease can cause
STOP
parts damage.
Do not apply greasing to undesignated places. Failure to observe this can cause
IMPORTANT!
malfunctioning or quality deterioration of parts.
Apply greasing to gear
mesh portions once every
3 months.
Use GREASE MATE
(SEGA PART NO.
090-0066).
PHOTO 9. 2
VR BASE
V.R.
220-5484
220-5373
VOLUME GEAR MESH PORTION
33
SCREW(2)
M4 X 12,w/flat & spring washers
FIG. 9. 1 b
www.seuservice.com