Table of Contents
Advertisement
14 - 3 ADJUSTMENT METHOD
Monitor adjustments have been made at the time of shipment. Therefore, do
not make further adjustment without a justifiable reason. Adjusting the
monitor which contains high tension parts is a dangerous work. Also, an
erroneous adjustment can cause deviated synchronization and image fault,
resulting in malfunctioning.
When making adjustment, utilize a resinous Alignment Rod. Servicing with
bare hand or using conductive tools can cause electric shock.
Remove the 2 screws from the Monitor Board Lid on top of the monitor, and the Adjustment
Board appears.
For adjustment, use the Resinous Adjustment Rod.
FIG. 14. 3
www.seuservice.com
TRUSS SCREW(2)
blackM4 X 10
Monitor Board Lid
PHOTO 14. 3
52
Advertisement
Table of Contents
