The following conditions must always be met unless otherwise indicated in other instructions in this manual. This wrapping machine has been supplied by FROMM WRAPPING SYSTEMS and can be used only to wrap pallets that meet the requirements indicated in the description of the machine in the TECHNICAL DATA chapter.
Fig 7 It is important that the guidelines are carefully observed. Machine operators could otherwise be at risk, the consequence of which could make the warranty null and void with no chance of claiming from FROMM WRAPPING SYSTEMS. Figure 8: Operations that must not be performed.
Slipping, tripping and falling: Pay attention to the product loading operations. Carefully follow the operating procedures in the user and maintenance manual. Maintenance operations: the maintenance operations must be performed only by FROMM ASSISTANCE SERVICE specialists. Keep device pressed (optional): the residual risk is associated with the risk of being crushed between the turntable and the product and between the carriage and the bottom part of the machine.
Page 41
Parameter 9). CONTACT THE FROMM ASSISTANCE SERVICE FOR MAINTENANCE OPERATIONS. Maintenance operations must be performed by FROMM trained personnel. The timer must be reset at ZERO and the alarm will disappear from the control panel. To reset the timer, enter the “Menu 1 hidden parameters” Parameter 4 and select YES.
Need help?
Do you have a question about the FS390 Series and is the answer not in the manual?
Questions and answers