Table of Contents
Advertisement
4.2
Managing Access Points
Individual Access Points are identified by their hardware address (or MAC
address). To insert a new Access Point into the APManager document manually,
its hardware address must be known. You can search for Access Points in your
network automatically; see Searching for Access Points.
Insert an Access Point
Select the Edit/Insert Access Point menu item to insert a new Access
Point into the selected WLAN. APManager will ask for the hardware
address of the Access Point.
Disable an Access Point
Move an Access Point to the 'Disabled' special WLAN by pressing
Delete or selecting the Edit/Clear menu item. Access Points in this
special WLAN will not be accessible for any client station.
The Access Points are shown with one of the following icons.
On-line
The Access Point is accessible on-line.
Off-line
The Access Point is currently not accessible, or the IP address is not known.
Locked
The Access Point is permanently locked. Its properties cannot be
changed
18
6
Advertisement
Table of Contents
