Build from Network - Access Point Settings
It is strongly recommended that the Network ID (SSID) be changed from the
default (default) to an SSID unique to your network. Only clients and Access
Points that share the same SSID are able to communicate with each other.
This Screen Also allows you to change the Channel used by the Access Point to
transmit and receive information.
After you set the SSID and/or Channel, click on Next. If your network contains
more than one Access Point, the wizard will display this screen again with the
setting of the next Access Point, the wizard will display this screen again with the
wettings of the next Access Point. When you have set SSIDs and/or channels for
all Access Points on your network, clicking on Next will take you to the Network
Security Dialog box.