Fertiliser And Dressed Seed; Environmental Protection; Retrofits - horsch Pronto 8 SW Operating Instructions Manual

Fertiliser and dressed
seed
Inappropriate handling of fertiliser and dressed
seed can cause poisoning and death.
Observe and follow the safety notes of the
¾
manufacturer of the agents. If necessary ask
the dealer for the corresponding safety data
sheet.
Determine and provide the personal protective
¾
outfit as specified by the manufacturer.

Environmental protection

Operating materials such as hydraulic oil, lubri-
cants, etc. can damage the environment and the
health of persons.
Do not allow operating materials to drain out
¾
into the environment.
Take up drained operating materials with
¾
absorbent material or sand, fill it into a leak
tight tank and dispose of in accordance with
statutory regulations.
12

Retrofits

Structural changes and extensions can adverse-
ly affect the functionality and the operational
safety of the machine. This can lead to severe
or even fatal physical injuries.
Do not make any structural changes or ex-
¾
tensions to the machine that have not been
approved by HORSCH.
Structural changes and extensions must only
¾
be made in an authorized workshop or by an
operator who has been trained by HORSCH.
Comply with country-specific instructions for
¾
weights, weight distribution and dimensions.
For equipment influencing the weight or weight
distribution the regulations concerning towing
facility, support and axle load must be checked
and complied with.
For machines without brakes a brake system
may need to be retrofitted if the permissible
weight limits are exceeded.
In case of changes concerning data mentioned
on the type plate, a new type plate with updated
data must be attached.
In case of changes which concern the data in
the type approval, this type approval needs to
be renewed.