Safety And Responsibility; Intended Use - horsch Pronto 8 SW Operating Instructions Manual

Safety and
responsibility
The following warnings and safety notes apply
to all sections in these operating instructions.
The machine has been built in accordance with
latest technical standards and generally ac-
cepted safety regulations. However, risks for
life and limb of the operator or third parties and
impairment of the machine or other material as-
sets can occur during use.
Please read and comply with the following safety
notes, before you start to use the machine!

Intended use

The machine is intended for normal use in drill-
ing and/or tillage in accordance with agricultural
practice. Any other use or use beyond the in-
tended use, e.g. as transport means, is consid-
ered unintended use and can lead to persons
being severely or fatally injured.
HORSCH will not assume liability whatsoever
for damage resulting from unintended use. The
risk will be borne solely by the user.
The respective accident prevention regulations
of the agricultural liability associations and other
generally recognised safety-related, occupa-
tional medical and road traffic regulations are
to be adhered to.
The machine must only be operated in a techni-
cally perfect condition and in a safety and danger
conscious manner!
Faults, particularly those which impair safety,
must be remedied immediately.
The machine must only be operated, serviced
and repaired by persons who are familiar with
it and have been made aware of the dangers
involved, see "Qualification of personnel".
6
Spare parts
Genuine spare parts and accessories from
HORSCH have been specially designed for this
machine.
Spare parts and accessories which are not de-
livered by us have not been tested or approved
by us.
Installation or use of non-original HORSCH
products may have a detrimental effect on
specific design features of the machine and
impair the safety of machine operators and the
machine itself.
HORSCH will not assume liability whatsoever for
damage resulting from the use of non-original
parts and accessories.
If the component to be replaced is marked with
a safety sticker, these stickers must also be
ordered and attached to the spare part.
Operating Instructions
Intended use also includes strict compliance with
the operating instructions and adherence to the
operating, maintenance and repair instructions
specified by the manufacturer.
The operating instructions are a part of the
machine!
The machine is solely intended for use as de-
scribed in the operating instructions. Failure to
comply with the operating instructions can result
in severe or even fatal physical injuries.
Read and follow the corresponding sections
¾
in the operating instructions before starting
work.
Store the operating instructions and keep for
¾
future use.
Pass the operating instructions on to a later
¾
user. When selling on into countries with dif-
ferent languages, pass on in the correspond-
ing official language.