Qualification Of Personnel; Children In Danger - horsch Pronto 8 SW Operating Instructions Manual

Qualification of personnel

Unintended use of the machine can lead to
severe or even fatal physical injuries. In order
to prevent accidents, each person involved in
work with the machine must meet the following
general minimum requirements:
The person must be physically able to keep
¾
the machine under control.
The person is able to perform work with the
¾
machine safely within the scope of these op-
erating instructions.
The person is acquainted with the function of
¾
the machine within the scope of its work and
is able to assess and avoid any work related
dangers. The person is able to recognize and
avoid work related dangers.
The person has understood the operating
¾
instructions and is able to implement the in-
formation given in the operating instructions
accordingly.
The person is fully familiar with the safe opera-
¾
tion of the vehicle.
The person knows all applicable road traffic
¾
regulations and is in possession of a valid
driving permit for road travel.
A person being instructed must only work with
¾
or on the machine under the supervision of
an experienced person.
The owner of the machine must
regulate the area of responsibility, compe-
¾
tence and monitoring of personnel.
if necessary train and instruct the personnel.
¾
make the operating instructions accessible for
¾
the machine operator.
ensure that the operator has read and under-
¾
stood the operating instructions.
Groups of operators
Persons who work with the machine must have
been trained for the different activities involved.
Instructed operators
These persons must have been trained for
their respective activities by the owner or other
qualified experts. This refers to the following
activities:
Road transportation
•
Application and set-up work
•
Operation
•
Maintenance
•
Troubleshooting and repair
•
Operators trained by HORSCH
Furthermore, for certain activities the corre-
sponding personnel must have been trained by
service personnel from HORSCH. This refers to
the following activities:
Loading and transport
•
Commissioning
•
Troubleshooting and repair
•
Waste disposal
•
Certain work concerning maintenance and repair
must only be carried out by an expert workshop.
Such work is identified with the additional com-
ment "Workshop work".

Children in danger

Children are not able to assess dangers and may
behave unpredictably. Children are therefore
especially endangered:
Keep children away from the machine.
¾
Especially before drive off and before trigger-
¾
ing machine movements you must make sure
that the danger zone is free of children.
Shut down the tractor before leaving it.
¾
Children can trigger dangerous machine
movements. An insufficiently secured ma-
chine parked without being attended poses
a danger for playing children!
7