Log File Function - Furuno WR110 Operator's Manual

4.5. Log file function

1) Log record:
Log record folder will be created automatically in to RainMap folder and to save log data.
[log]
・RainMap.log (Log file)
・YYYYMMDDhhmmss.dat (The configuration file which compressed (ZIP) the transmission start
date and time is up to 1, 000 files)
2) Limit of Log file (RainMap.log):
When a file of transmission start date and time is over 1,000 files, it will overwrite from the oldest file.
3) Log file (RainMap.log) format：
It saves with Text format.
e.g.)
[2014/06/17 10:35:06] SendParam,20140617_103506.dat
[2014/06/18 20:08:45] TRxStart,20140618_200845.dat
Configuration file (YYYYMMDDhhmmss.ini)
This file is saved by section and key setting with RainMap software.
(This file is using for saving a current set value)
Detail of Log record contents： (It records a normal and error situation)
Message
―
AppStart
―
AppEnd
―
Connect
Connected Command
Data
―
Disconnect
Command
Data
SendParam (Saved configuration file)
TRxStart (Saved configuration file)
―
EmrStop
ErrStat (PXI status))
RainMap_ErrorDisp.log: It saves the display detail of failure information that refers from GUI of
RainMap_ErroHist.log: It saves all failure that occurred before.
Detail
Start of Application
End of Application
Start Connection
Connect Command Port
Connect Data Port
Shutdown Connection
Shutdown Command Port
Shutdown Data Port
Send Parameter
Start TRX
Emergency stop
Failure status
RainMap.
23
Situation
ZIP configuration file
ZIP configuration file
S2E-17-0055_A
Remarks