Table of Contents
Advertisement
Chapter 6: Upload User Application
6. Upload User Application
The user application is dedicated to control and it is programmed by ControlBridge Builder programming tools.
6.1 Using ControlBridge Builder
Follow these steps:
1. Connect the controller to your computer as described in the Connecting / ControlBridge Network chapter.
2. Run ControlBridge Builder on your PC.
3. Open a project in ControlBridge Builder. You must have the appropriate controller properly inserted and configured.
4. Use the tool bar Final button to open the Upload and Export Application dialog box.
5. Be sure your controller is checked.
Final Button
Upload Button
Figure 6-1. ControlBridge Builder screen.
6. Use the Upload button to start application upload.
7. If controller firmware isn't updated, it will be uploaded automatically first and then the application upload will be finished.
877-877-2269 | blackbox.com
Page 38
Advertisement
Table of Contents
