Operation; Factory And System Default Settings - Black Box ControlBridge CB-PS-12V User Manual

4. Operation

4.1 Factory and System Default Settings

Every device shipped from the factory is set according to table bellow, Factory Default column.
To restore the System Default settings, press the System Default (S.D.) button. This button enables you to connect if you lost
the password or if you do not know the IP settings. Press the S.D. button until the CPU LED indicator flashes to confirm the
system defaults settings are restored according to table below, System Default column. Use a thin screwdriver to press the
S.D. button.
Configuration
Identification
IP settings
DNS
Table 4-1. Factory and System Default settings.
Name
Host name
IP address
Subnet mask
Default gateway
Primary DNS server
Secondary DNS server
877-877-2269 | blackbox.com
Chapter 4: Operation
Factory Default System Default
Empty Not changed
Empty Not changed
192.168.1.127 192.168.1.127
255.255.255.0 255.255.255.0
192.168.1.1 192.168.1.1
Empty Not changed
Empty Not changed
Page 15