Connecting; Power In - Black Box ControlBridge CB-PS-12V User Manual

Chapter 5: Connecting

5. Connecting

The following table describes connections for both controllers.
Unit
ControlBridge 100
ControlBridge 200

5.1 Power In

The unit requires power 24 VDC from an external power supply. Use any unit ONLY with the power adapter supplied in the
product package. Using another power supply may damage the unit.
Power consumption
▪ ControlBridge 100
▪ ControlBridge 200
2-pin 3.5 mm
+ G
Power Adapter
A standard power adapter is delivered with the ContrBridge. Attach the 2-pin connector of the power supply unit to the PWR
IN connector located on the rear panel and attach the power cable to a power outlet.
ControlBridge
Network
default IP address
192.168.1.127
AUDIO LINE
F. D. IN OUT
L G R L G R
Page 20
Table 5-1. ControlBridge connections.
1 1 1 3
1 1 1
max. 4 W
max. 4 W
Table 5-2. Connector Pin Out.
Pin Description
+ Power +24 VDC
G Ground
IR/SERIAL SERIAL
1 2 3 4 1 2
S G S G S G S G + G 1 2 3 4 5 1 2 3 4 5
Figure 5-1. Power adapter.
877-877-2269 | blackbox.com
Connection
8
2 4 4
PWR IN
GENERAL I/O RELAY PWR IN
1 2 3 4 G 1 2 24 VDC
S S S S G NC C NO NC C NO + G
2