Deleting Wireless Devices - DSC LCD5501Z32-900 Installation Manual

E N R O L L
For systems using multiple partitions: i.e. all
handheld keypads assigned to Partition 1 will have
the four functions programmed in section [57]. All
handheld keypads assigned to Partition 2 will have
the four functions programmed in section [58]. For
example, if function button 1 in Section [57] is
programmed for Stay arming, then pressing the first
button on handheld keypads assigned to Partition 1
will Stay arm Partition 1.
1. At a system keypad, enter [ ][8][Installer's code]
to go to the Installer's Programming section.
2. Enter programming section [804].
3. Enter programming section for partition 1 function
buttons, or for partition 2 function buttons.
4. For each of the 4 function buttons, enter the 2-
digit number of the function you want to select.
See the programming worksheets for a list of
function button options.
5. Record your programming choices in the
worksheets in the back of the manual.
6. To exit press [#].
& P R O G R A M

3.6 Deleting Wireless Devices

To remove a wireless device from the system, follow
the guideline for adding a wireless device. Program
the ESN as [000000]. The wireless device for the
zone will be removed.
NOTE: You may need to remove power from the panel
in order to clear troubles caused by deleted zones.
Now that you have enrolled all the wireless devices,
you will need to program the system to work properly
with the devices. See section 4 for more information.
10
D E V I C E S