Table of Contents
Advertisement
Martin Engineering M3699-03/16
6. Remove equipment from service if there is any indication it is not
functioning properly. Call Martin Engineering or representative for
assistance. Do NOT return equipment to operation until the cause of the
problem has been identified and corrected.
Failure to remove tools from maintenance area and conveyor
belt before turning on energy source can cause serious injury
to personnel and damage to belt.
7. Remove all tools from maintenance area.
Do not touch or go near conveyor belt or conveyor accessories
when conveyor belt is running. Body or clothing can get
caught and pulled into conveyor belt, causing severe injury or
death.
8. Start conveyor belt.
9. Observe cleaner action and blade effectiveness.
19
WARNING
!
DANGER
!
Martin
®
DT2 Inline Cleaner XHD
Advertisement
Table of Contents
