Martin DT2 Operator's Manual page 15

Martin Engineering M3699-03/16
7. Slide blade cartridge onto mainframe mandrel. Loosen set screws on
mandrel and align holes in mandrel, blade cartridge and slide bracket.
8. Center blades to the belt by loosening end stops and split frame and
repositioning blades. Retighten.
9. Thoroughly check all mounting and locking screws to ensure they are
tight and the cleaner is secured.
10. Installation is now complete. See instructions for adjusting cleaner
against the belt.
11
®
Martin DT2 Inline Cleaner XHD