Advertisement
Feature Programming Through Menu Mode
Using Master
1. Enter 4-8 digit master
2. Enter digit corresponding to the function to be performed followed by the
*The Master
PIN
code must be registered prior to any other programming of the lock.
Note: After Master
PIN
code is entered, lock will automatically hand itself. For best results,
lock should be installed on door during this process. If this process was done and lock was
not installed on door, review the Re-Handing instructions listed in Hardware Troubleshooting.
M
1
Master
PIN
User Codes
Advanced Lock Settings
Audio Mode
N/A
All Code Lockout Mode
**Network Setting
***Set-up Digital Keys
PIN
code*
PIN
code* followed by
2
M
Code Setting
Enter
Delete
Automatic Re-lock
Inside Indicator Light
One Touch Locking
Privacy Button Setting
Handing the Lock
Enable
For quiet areas, select Disable (3)
Disable
in Audio Mode.
Enable
Disable
Join the network
Exit the network
P/N
YRL EMICL PBINSTL FUL
-
key.
1~12: with Bluetooth
1~25: without network module or with iM1 network module
1~250: with Z-Wave Plus or ZigBee network module
U
Continue
Complete
U
Continue
Complete
Disable
30 sec
60 sec
2 min
3 min
Enable
Disable
Enable
Disable
Enable
Disable
Preforms automatic
handing of the lock
Default settings
in bold.
**This function appears only with
network module installed.
34
-
-
Rev B
key.
Continue
Complete
Advertisement
