Table of Contents
Advertisement
TABLE 6 Installation and basic system configuration (Continued)
Task
Verify that the device operates correctly. • Check the LEDs to verify operation of functional parts. Refer to
Back up the configuration.
Optional: Power off the devices.
Shipping carton contents
When unpacking the device, verify that the contents of the shipping carton is complete. Save the
shipping carton and packaging in the event you need to return the shipment.
• The IBM device
• An accessory kit containing the following items:
‐ A serial cable
‐ Two 6-ft. power cords
‐ Power cord retainer clips
‐ Rubber feet.
‐ China-RoHS Hazardous/Toxic Substance statement
‐ Network Advisor web pointer card.
‐ EZSwitch web pointer card
‐ IBM documentation web pointer card
• Inner foam
Hardware Installation Guide
Task details or additional information
port-side LEDs
on page 67 and
• The following commands can be useful to establish an operational baseline for
the device. Refer to the Fabric OS Command Reference for more information
on these commands.
‐ psshow
‐ fanshow
‐ tempshow
‐ historyshow
‐ errdump
Use the interactive configupload command to back up the configuration. Refer to
Verifying correct operation
on page 56 for more information.
Enter the shutdown command and wait for the device to power down, and then
unplug the power cords. Refer to
information.
Interpreting nonport-side LEDs
Powering down the device
on page 58 for more
Shipping carton contents
Completed
Interpreting
on page 70.
23
Hide quick links:
Advertisement
Table of Contents
