Table of Contents
Advertisement
1
2
FIGURE 7 Attaching the rear brackets to the extensions
Attaching the rear brackets to the rack posts
Complete the following steps to attach the rear brackets to the rack posts.
1. Attach the right rear bracket to the right rear rack post using two 10-32 x 5/8-in. panhead screws and
two retainer nuts, as shown in
2. Attach the left rear bracket to the left rear rack post using two 10-32 x 5/8-in. panhead screws and
two retainer nuts. Use the upper and lower holes in the bracket.
3. Tighten all the 10-32 x 5/8-in. screws to a torque of 25 in-lb (29 cm-kg).
Hardware Installation Guide
Rear brackets
Screws, 6-32 x 1/4-in., panhead Phillips
Attaching the rear brackets to the rack posts
Figure 8
. Use the upper and lower holes in the bracket.
33
Hide quick links:
Advertisement
Table of Contents
