Make Host Connections - Hitachi VSP G130 Installation Manual

2. To configure the storage system to send notifications in syslog format, complete the
settings in the Syslog tab. Then open a firewall port on your network for
transferring syslogs.
3. To configure the storage system to send notifications as SNMP traps, complete the
settings in the SNMP tab.
4. Click Apply, and then click OK.
Step 5: Make host connections
Before you connect Fibre Channel hosts to the storage system, the storage system and
hosts must be prepared.
Host attachment tasks include configuring ports and preparing the host hardware and
software for connection to the storage system. For information and instructions, see the
host attachment preparation procedures in the Open-Systems Host Attachment Guide. You
will also find the following resources helpful:
For the latest interoperability and compatibility information about supported hosts
■
and host attachment hardware, see the Hitachi Vantara
For information about preparing your hosts for use with the storage system, see the
■
documentation for the product.
Hitachi Virtual Storage Platform G130 (with SVP) Installation Guide
Installing your storage system that includes an SVP
Step 5: Make host connections
Interoperability Reports.
22