Table of Contents
Advertisement
7. DAB
The radio receives all the conventional digital radio
frequencies in a range from 174 MHz to 240 MHz (band
III, channels 5A to 13F).
• Enable DAB operating mode on the radio by repeatedly
pressing [mode]:
• Alternatively, press [DAB] on the remote control to switch
directly to this operating mode.
7.1 Suchlauf/ Automatischer Suchlauf
The automatic DAB channel search scans DAB band III for
available stations. After the station search, all interference-
free stations are saved in alphabetical order.
In the station list, a ? is displayed in front of the station
names of stations found during a previous scan but which
cannot currently be received.
The automatic DAB station search starts automatically
when DAB mode is started for the first time; it is indicated
by Search... and a status bar on the display.
If you would like to start the search again, proceed as
follows:
7.2 Station list
You can call up the station list in DAB mode at any time.
There are two options for doing this.
a) If a station is already playing, simply turn [enter/
navigate]. The radio will then display the station list.
b)
[mode]
7.3 Cleaning up the station list
To remove stations that are not currently in the reception
area from your station list, proceed as follows:
[menu]
If you answer [YES], then all currently unavailable stations
will be removed from the station list.
Scan
7
[menu]
Station list
[menu]
Edit
Advertisement
Table of Contents
