Installing Options; Installing Input Module - RGBlink VENUS X2 User Manual

6.3 Installing Options

6.3.1 Installing Input Module

VENUS X2 and VENUS X3 support replaceable input and output optional modules, user can install
or replace the optional module according to actual need. The installation steps of VENUS X2 and
VENUS X3 are the same. Here we take VENUS X3 for example, specific steps are as follows:
Install the Optional Module
1. Unscrew the 2 captive screws in input modules block, and pull out the input module block, as
shown in figure:
2. Install the input module:
For the whole PCB input module with DVI or HDMI interface, fix the input module on the
plate with 2 M3*4 flat screws, also need to install the 2G Micro SD card.
VENUS X2 User Manual
Chapter 6: Appendix
Captive Screw
29