Advertisement
Mar-18
7. MAINTENANCE
Monthly maintenance is recommended. Lubrication is critical to jacks as they support
heavy loads. Any restriction due to dirt, rust, etc, can cause either slow movement or
cause extremely rapid jerks damaging the internal components. The following steps are
designed to keep the jack well maintained and operational.
Important: Dirt is the greatest single cause of failure in hydraulic units. Keep the jack
clean and well lubricated to prevent foreign matter from entering the system. If the jack
has been exposed to rain, snow, sand, or grit it must be cleaned before it is stored or
used.
Only use replacement parts that are approved by the manufacturer. Disconnect the
air supply before performing any maintenance operation.
Lubricate the ram, linkages, saddle, wheels and pump mechanism with light oil.
Visually inspect for cracked welds, bent, loose, missing parts or hydraulic oil leaks.
Any hydraulic jack found to be damaged, worn or operates abnormally must be
removed from service until repaired by an authorised service representative.
Regularly clean all surfaces and maintain all labels and warnings.
Check and maintain the hydraulic ram oil level.
Check the ram every three months for any sign of rust or corrosion. Clean as needed
and wipe with an oily cloth. When not in use always leave the saddle and ram all the
way down.
Always store your jack in the fully retracted position. This will help protect critical
areas from corrosion. Do not use brake or transmission fluids or regular motor oil as
they can damage the seals.
8. SERVICE & REPAIR
Any jack found damaged in any way, or found to be worn or operates abnormally should
be removed from service until repaired by an authorised service agent. Owners and / or
operators should be aware that repair of this product may require specialised equipment
and knowledge. Only authorised parts, labels, decals shall be used on this equipment.
Annual inspection of the jack is recommended and can be made by an authorised repair
facility to ensure that your equipment is in optimum condition and that the equipment
has the correct decals and safety labels specified by the manufacturer.
ONLY USE HIGH QUALITY HYDRAULIC FLUID – ISO68
Made in China to TQB Brands Pty Ltd specifications
Visit us at www.tqbbrands.com.au
Product Code: BPROAJ22T
Page 6
Advertisement
