TO SET SELF-CLEAN
1. Close oven door. Push CLEAN.
The time display will
You may need to press
slightly on the door.
2. Press L_
to set the desired length of clean
change it between 2 and 4 hours, depending on how
dirty the oven Is.
The door locks
after the controls are set. The display
will show "LOCK"
when door locks.
1. Push CLEAR/OFF.
Follow steps 1-2 under "TO
3. Press STOP
4. Set the time of day when you want the clean cycle to
end. See Fig, 4.
The control will calculate the start clean time.
YOU can push STOP
to find OUt when the cycle
will end. Push CLEAN
to return to countdown.
1. Walt until the LOCK
display goes out.
temperature muSt drop to a safe level before the door
can be opened.
See Fig. 3.
When selecting a stop time for a delayed clean
cycle, you must allow time for the 2-4 hour clean
Your oven light should be OFF during a self-clean cycle
to prolong the life of the bulb.
WAIT UNTIL LOCK GOES OUT
If you cannot open the door immediately after the word
LOCK goes off, walt about one minute and try again.