Self-Clean Cycle - Kenmore 93521 Use, Care, Safety Manual

TO SET SELF-CLEAN CYCLE:
1. Slide door loCk handle to the right. You may need to
lightly press on the door to lock It properly.
2. Push CLEAN. The time display will show (---). See
Fig. 1.
Fig. 1
@
3. Press the UP or DOWN arrow pad to set the destred
length of clean time. Clean time Is normally 3 hours.
You can change It between 2 and 4 hours, depending
on how dirty the oven Is. See Fig. 2.
CLEAN TIME
Fig.
2
You can push STOP TIME to find out when the cycle
will end. Push CLEAN to return to countdown.
WHEN A CLEAN CYCLE IS
FINISHED:
1. Walt until the LOCK display goes out. Allow 30
minutes for oven to cool. The oven temperature must
drop to a safe level before the door can be unlocked.
See Fig. 3.
2. Slide door lock handle to the left.
NEVER FORCE THE DOOR LOCK/UNLOCK
HANDLE. FORCING THE HANDLE MAY DAMAGE
THE DOOR LOCK.
UNTIL OUT
TO INTERRUPT A CLEAN CYCLE:
I. Push CLEAR.
Follow InstrucUons under "WHEN A CLEAN
CYCLE IS FINISHED".
TO SET DELAYED SELF-CLEAN
CYCLE:
Follow steps 1-3 under "TO SET SELF.CLEAN
CYCLE", THEN:
4. Press STOP TIME.
5. Set the time of day when you want the clean cycle to
end. See Fig. 4.
The control will calculate the start clean time.
Fig. 4
INCREASE OR DECREASE
CLEAN TIME
SET TIME OF DAY YOU
WANT CLEAN CYCLE TO END
Note:When selecting a stop time for a
delayed clean cycle, you must allow
time tor the 2-4 hour clean time.
"Door" will flash In display If you forget to lock the door.
NOTE: Your oven light should be OFF during a
self-clean cycle to prolong the life of the
bulb.
Fig. 3
14 NCSCL05