Advertisement
REMOVABLE
OVEN
DOOR
To remove:
1. Open the door to the stop position (see Illustration).
2. Grasp the door at each side and lift up and off the
hinges.
NOTE:
When the door is removed
and hinge arms
are at stop position,
do not bump or try to move
the
hinge
arms.
The
hinges
could
snap
back
causing
an injury
to the hands or damage
to the
porcelain
on the
front
of the range.
Cover
the
hinges
with toweling
or empty
towel
rolls while
working
in the oven area.
To replace:
t.
Hold the door over the hinges with the slots at the
bottom edge of the door lined up with the hinges.
The
hinge
arms
must
still
he
in the
stop
position.
2. Slide the door down onto the hinges as far as It will
go and close the door.
STOP POSITION
HINGE
VENTTRIM
REMOVABLE
OVEN
RACKS
Be careful not to scratch the oven finish when Installing
or removing oven racks.
To install:
1. Set the raised back edge of the rack on a pair of rack
guides,
2. Push the rack in until you reach the bump in the rack
guide, then lift the front of the rack a bit and push the
rack all the way In.
TO remove:
1. Pull the oven rack out, then up, In one motion.
See
the cleaning chart.
Note:
For best performance
remove
oven racks
during a clean cycle.
If oven racks
are left
in the range during a clean cycle,
they will
darken,
lose their luster
and become
hard
to slide.
If you choose
to leave
the racks
in the oven,
you can
polish
the edges
of
the
racks
with
steel
wool
and
apply
a
small amount
of vegetable
oil to the rack
edges after
the self-clean
cycle.
This will
make
the racks
easier
to slide.
16
NEMNT71
Advertisement
