Air & Water Pressure; Power Supply; Weight & Dimensions; Troubleshooting - EMS AirFlow Master Installation Manuals

AIR & WATER PRESSURE
For the unit to function correctly the delivery air pressure should be maintained between 5.5 & 7.5 Bar. The air supply
must be dry and free of any contaminants.
The delivery water pressure should be maintained between 1.0 & 5.0 Bar. The water supply must be of good quality
and free of any contaminants.
IMPORTANT: Failure to maintain correct air and water pressure during operation may affect the performance of the
unit.

POWER SUPPLY

The unit is connected to the mains power supply using the UK Power Supply Cord supplied with the unit. Supply voltage
100-240 VAC 50-60Hz.
WEIGHT & DIMMENSIONS
The unit should be located on a stable and level surface. Weights and dimensions are approximate.
AirFlow Master
HxWxD: 225 x 225 x 295mm
Weight: 5.0 kg

TROUBLESHOOTING

Refer to the Operating Manual.
ADDITIONAL INFORMATION
Contact Optident Limited direct on 01943 605050.
AirFlow Master Piezon
HxWxD: 225 x 280 x 295mm
Weight: 4.5 kg