How To Carry The Sewing Machine; Installation Of The Sewing Machine Head - JUKI LK-1900S Series Instruction Manual

3-6. How to carry the sewing machine

To carry the sewing machine, it is necessary to hold A section and support the side faces of the sewing ma-
chine by hand as illustrated in the figure.
1. Carefully prevent slippage of your hand that holds the cover.
2. The sewing machine weighs over 42 kg. Be sure to carry the sewing machine with two or
more people without exceptions.
3. The LED light is installed to the undersurface of the frame. Do not hold the LED light when
moving the frame.

3-7. Installation of the sewing machine head

WARNING :
To prevent possible accidents caused by the full of the sewing machine, perform the work by two
persons or more when the machine is moved.
A
❶
C
Machine
head side
❸
❺
❻
❷
A
❼
❶
C
❸
Machine
❺
head side
❹
❻
❹ A
❹
❹
B
－
1) Fit hinge rubber cushion ❶ over the hinge shaft.
2) Install the main body of the sewing machine on
the table with four bolts ❷ , four plain washers ❸ ,
four spring washers ❹ , four hexagonal nuts ❺
and four hexagonal nuts ❻ .
1. Tighten nut ❺ until spring washer ❹
is brought to the state as illustrated
in Fig. B and fix the spring washer on
hinge rubber ❼ with nut ❻ .
2. Mount hinge rubber ❼ while orient-
ing its corner section C toward the
machine head side. Be aware that the
hinge rubber fails to function properly
if nuts ❺ and ❻ are excessively tight-
ened.
3. When carrying the sewing machine,
hold sections A with hands to support
the side faces of the sewing machine.
－
7
A