JUKI LK-1900S Series Instruction Manual page 37

(2) Completion of counting
The count completion screen has been factory-set to "disabled" at the time of shipment.
In order to use the count-completion screen for the sewing counter, set the memory switch U077 to "Enable
display". (Refer to "I.8-2. List of the memory switch functions"
[Bobbin thread counter]
(1) How to set the bobbin thread counter
E F G

G
❸
❷
3) Changing the current value of the bobbin thread counter
Press ITEM SELECT key
In addition, It is possible to edit the numeric value by DATA CHANGE key
1) Selection of kinds of counters

❼
❻
2) Changing the set value for the bobbin thread
❻ to display the current value F of the counter in reverse video.
－ －
35
p.59.)
Press ITEM SELECT key
pictograph E which indicates the counter type in
reverse video.
Press DATA CHANGE key
the counter you desire from among the kinds of
counters below.
counter
Press ITEM SELECT key
set value G for the bobbin thread counter in the
reverse video.
Enter the set value to be counted until this value
is reached by pressing DATA CHANGE key
❼ .
❻ to display the
❼ , and select
❻ to display the
❼ .