JUKI LK-1900S Series Instruction Manual page 34

3) Selecting the edit point
When you press ITEM SELECT key
in reverse video. When you move the edit point forward until the last point is reached, additional indica-
tion pictograph is displayed.
When you press EDIT key
is displayed at the selected position to enable insertion of pattern data.
4) Change data of selected editing point.
Press DATA CHANGE key
Pattern No. which has been registered is displayed and it is possible to select.
In addition, press RESET key
When RESET key
ed.
Repeat steps 3) and 4) to perform editing data.
5) Cancelling insertion of pattern data
Insertion of the pattern data is cancelled and the mode is changed over to the input mode by pressing
RETURN key
E
❻ , the edit point is changed and the current point is displayed
❽ while selecting the edit point, the additional indication pictograph
❼ and data of editing point can be changed.
❸ , and the pattern data of editing point can be deleted.
❸ is held pressed for one second, all the registered pattern data can be delet-
❾ .
❽ ❻
6) Editing the comment
Press ITEM SELECT key
cle data editing" is displayed to display comment
section E in the reverse video. The comment
input screen is displayed by pressing EDIT key
❽ while the comment section is being
selected.
""I-5-3.(4) Setting the comment"
(Refer to
p.19
for how to input the comment.)
－ －
32
❻ while the "cy-